Cart

The fischer gypsum plasterboard fixing GK S is made of high-quality nylon. When in pre-positioned installation, the plug is screwed in using the setting tool included with a cordless screwdriver so that it is flush to the surface in gypsum ...

The CELO hollow block frame plug HBR with its large setting depth is predestined for fixings in hollow bricks and blocks. The particularly long expansion area and the high expansion ability generate high pull out loads. 10 holding fins at the front ...

The fischer frame fixing SXRL-T A4 is approved along with the fischer countersunk head screw with TX40 drive for multiple fixings of non-load-bearing systems in masonry, concrete, and aerated concrete. The two expansion zones in the fixing induce ...

The fischer fixing set BO contains all elements required for the quick and safe fixing of wall-hanging boilers: Four universal plugs UX 14 x 75, four zinc-plated stud screws M10 x 120 and four flanged nuts without collar. With the fischer universal ...

The fischer nail anchor FNA II 6 with nail head is made of zinc-plated steel. The FNA II is set in a time-saving manner in the push-through installation with just a few taps of the hammer. The installed FNA II expands automatically under load. The ...

The fischer nail anchor FNA II 6 with nail head is made of stainless steel. The FNA II is set in a time-saving manner in the push-through installation with just a few taps of the hammer. The installed FNA II expands automatically under load. The cone ...

The fischer Hammerfix N-S M with countersunk head and connecting thread M 6 consists of a high-quality nylon plug and a zinc-plated nail screw. These are already pre-fitted for quick assembly. When driving in the nail screw, the fixing sleeve expands ...

The fischer frame fixing SXRL-T is approved along with the fischer countersunk head screw with TX40 drive for multiple fixings of non-load-bearing systems in masonry, concrete, and aerated concrete. The two expansion zones in the fixing induce forces ...

The fischer frame fixing SXR-T is a plug made of high-quality nylon along with the pre-mounted fischer safety screw with countersunk head. Due to the special plug geometry, the SXR can be used in solid and hollow building materials. Due to the low ...

The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster ...

The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster ...

Der fischer Hammerbohrer Quattric - der Experte für Höchstleistungen in bewehrtem Beton Vorteile: Hartmetallkopf (bis ø 10mm) für eine hohe Standzeit Power Shoulders zur verbesserten Aufbruchleistung in Beton Massive ...

The fischer nail anchor FNA II 6 with thread and flange nut is made of highly corrosion-resistant steel. The FNA II is set in a time-saving manner in the push-through or pre-positioned installation with just a few taps of the hammer. The installed ...

The fischer nail anchor FNA II 6 with thread and flange nut is made of zinc-plated steel. The FNA II is set in a time-saving manner in the push-through or pre-positioned installation with just a few taps of the hammer. The installed FNA II expands ...

The fischer universal fixing FU is an easily set fixing for almost all building materials. The fischer FU, made of high-quality nylon, expands in solid building materials such as concrete and aerated concrete. The anchor sleeve buckles with ...

Sekundenkleber für Gummi, Metall, saugende und poröse Werkstoffe Beschreibung: Cyanacrylatklebstoff für Gummiund Kunststoffe | hochviskos | langsamere Aushärtung WEICON Contact VA 1500 eignet sich für saugende und ...

The fischer gypsum plasterboard fixing GKM is made of metal. When in pre-positioned installation, the plug is screwed in either manually or with a cordless screwdriver so that it is flush to the surface in gypsum plasterboard. No pre-drilling is ...

The fischer concrete screw UltraCut FBS II US R, with the specially hardened red tip is a high-performance anchoring solution for fast installation. The concrete screw with the pressed washer is ideal for applications outside or in damp areas. The ...

The tried and tested wedge anchor B with European Technical Assessment, Option 7, is ideal for time-saving through fastenings in uncracked concrete. Thanks to its three anchorage depths, it adapts flexibly to the respective installation requirement. ...

The fischer Hammerset anchor EA II M 12 D is an internal threaded anchor made of zinc-plated steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EAW H Plus the sleeve is expanded by ...

The fischer Hammerset anchor EA II M 12 N D is an internal threaded anchor made of zinc-plated steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EAW H Plus the sleeve is expanded by ...

The fischer ZYKON bolt anchor is an anchor made of zinc-plated steel. The special drill bit FZUB is used to create the undercut drill hole in a single work step. The undercut anchor is set in the pre-positioned installation. The expansion sleeve is ...

The fischer Universal plug UX Green is a plastic plug made from high-quality nylon. The granulate used in the production of the plug comes from at least fifty-percent raw materials. These are not in competition with agricultural areas for food and ...

haftstarker und schnellhärtender 1K Gummi-Metall-Kleber Beschreibung: Dauerelastisch | feuchtigkeitsbeständig WEICON GMK 2410 ist ein Klebstoff auf Basis von Polychloropren (CR) mit einer hohen Anfangshaftung zur vollflächigen ...

The fischer Aircrete anchor FPX-I is made of zinc-plated steel. After pre-drilling, the FPX-I is only driven in with the hammer. It is not necessary to clean the drill hole. The fischer Aircrete anchor is applied with a hex driver via a cordless ...

The fischer ZYKON push-through anchor FZA-D is an anchor made of zinc-plated steel. The special drill bit FZUB is used to create the undercut drill hole in a single work step. The undercut anchor is set in the through-type installation. The expansion ...

The fischer ZYKON anchor for fixing step irons FZA ST is a stainless steel anchor. The special drill bit FZUB is used to create the undercut drill hole in a single work step. The undercut anchor is set in the pre-positioned installation. The ...

The fischer hollow-ceiling anchor FHY is an internal threaded anchor made of zinc-plated steel. The FHY is set into the drill hole by hand via the pre-positioned installation, and then driven in with the hammer until it is surface-flush with the ...

Die PDKB Pfostenhalter sind höhenverstellbar und können so Unebenheiten in der Höhe ausgleichen. Eigenschaften Material: Stahlqualität: S 235 JR gemäß DIN EN 10025 Korrosionsschutz: nach Bearbeitung rundumfeuerverzinkt; ...

The GESIPA blind rivet nuts with a large grip range PolyGrip blind rivet nuts are the logical further development of many years of experience with our PolyGrip multi-range blind rivets. Thanks to the benefits of its large drilling hole tolerance and ...

The GESIPA blind rivet nuts with a large grip range PolyGrip blind rivet nuts are the logical further development of many years of experience with our PolyGrip multi-range blind rivets. Thanks to the benefits of its large drilling hole tolerance and ...

The reliable blind rivet nut tool with mechanical stroke setting for blind rivet nuts up to M10 Alu. TECHNICAL DATA - Weight: 2.1 kg with battery - Setting force: 13,000 N - Drive: DC motor - Stroke: 5.5 mm WORKING RANGE - Blind rivet nuts up to ...

Fastening with ResiTHERM is the perfect solution for heavy duty distance installations in insulated facades. The black thermal break insert effectively eliminates thermal bridges and protects against mould and heat loss. With a pre-mounted EPDM seal, ...

General purpose anchor TRI The red TRI is the original of all general purpose anchors and an excellent choice for DIY projects and professional applications. It offers high holding values, stability and is very easy to install, saving time. The ...

The fischer drive anchor DIPK consists of a white anchor sleeve with integrated plate and a glass-fibre reinforced plastic nail. The DIPK is set using a hammer. Driving in the nail causes the anchor shaft to expand in the building material. The GRP ...

The fischer Highbond-Anchor dynamic FHB-A dyn is processed with the injection mortar FIS HB. It is used to support dynamic alternating loads. The approved anchor with its cone shape ensures a controlled expansion under dynamic stress, thus allowing ...

The Drop-in Anchor E A4 is approved as single anchor in uncracked concrete as well as for redundant fastening use for nonstructural applications in cracked and uncracked concrete. The Drop-in Anchor E A4 is placed into the drill hole in pre-setting ...

stahlgefülltes flüssiges Epoxidharz-System für Verguss und Spaltausgleich Beschreibung: flüssig | stahlgefüllt | verschleißfest WEICON WR eignet sich für Bereiche, in denen Metallteile durch Reibung starker ...

Die Fiberscheiben CS 570 sind ideal auf die Bearbeitung von Edelstahl, hochlegiertem Stahl und Aluminium abgestimmt. Für einen kühlen Schliff auch bei hohem Anpressdruck und schnellen Drehzahlen sind sie zusätzlich mit schleifaktiven ...

Der fischer Hammerbohrer Quattric - der Experte für Höchstleistungen in bewehrtem Beton Vorteile: Hartmetallkopf (bis ø 10mm) für eine hohe Standzeit Power Shoulders zur verbesserten Aufbruchleistung in Beton Massive ...

Soudaflex 40 FC ist ein elastischer Kleb-/Dichtstoff auf Polyurethan-Basis mit universellem Anwendungsspektrum. Eigenschaften: Sehr gut verarbeitbar Dauerelastisch nach Aushärtung Gute UV-Beständigkeit Sehr gute Haftung auf vielen ...

The Drop-in Anchor E is approved for redundant fastening for non-structural applications in cracked and uncracked concrete. The anchor sizes with an embedment of 30 mm deep are also approved as single anchor in uncracked concrete. The Drop-in Anchors ...